From a small wooden piece of rest can be relatively simple to produce a pen holder. The dimensions of the piece of wood are not important, only the holes should have at least a diameter of about 1.2 cm, for thicker filler or the like. First, record the holes with a pencil, then drill with a drill. As a little help, you can also prepare a nail for the drill with a nail and hammer carefully in the middle of each hole. Then sand the small wooden block and break the edges a little with very fine sandpaper. Then you can still treat the pen holder with suitable oil to make him more resistant to external influences Einflüse. However, the color of the wood will change a bit. It is best to oil twice and sand again in between. Finished.